| 产品特性：硅酮胶 | 是否进口：否 | 品牌：之江 |
| 基料：硅酮密封胶 | 硫化方法：湿空气硫化型密封胶 | 功能：车灯密封粘接 |
| 用途范围：汽车车灯、电子电器 | 型号：JS-8100 | 包装规格：300ml |
| 加工定制：是 | 固化时间：24小时 | 密度：1.41 |
| 温度范围：-60-200° | 硬度：50A | 剪切强度(MPa)：1mpa |
| 拉伸强度(MPa)：1.5mpa | 固化方式：湿气固化 | 断裂拉伸率(%)：280% |
之江密封胶JS-8100车灯胶
之江JS-8100产品特性/Products Features
JS-8100单组分车灯胶是专为汽车车灯粘接密封研发的有机硅密封胶，对大多数材质具有不错的粘接性。产品具有的主要特性：
1. 使用方便，有良好的挤出施工性；
2. 良好的粘接性，可粘接多种基材，无需底涂；
3. 中性固化，无腐蚀性；
4. 优异的耐高低温性能，可在-60℃至200℃长期工作；
5. 的耐气候老化性；
6. 优异的电绝缘性能。
JS-8100 one-component Silicone Sealant For Automotive Lamp is designed for the adhesive and sealing of automobile headlights, it has good adhesion to most materials. Products with these main features:
1. Easy to use, good extrusion workability
2. Good adhesion, bonding a variety of substrates without primer
3. Neutral curing, non-corrosive
4. Stable performance under the temperature range from –60 ℃ to 200 ℃
5. Excellent weather resistance
6. Excellent electrical insulation properties
之江JS-8100产品用途/Applications
主要适用于车灯的防水粘接密封，电子电器及通讯设备的粘接、防水密封以及其它灯具防水密封。因各材质的种类及表面处理方式不同，建议行适当和合理的粘附和物性确认后，才可上线使用。
The waterproof adhesive and seal could be used for the automotive lights, the electrical and electronic and communications equipment and other high-grade lamps. Due to the different types of materials and surface treatment methods, it is suggested that proper and reasonable adhesion and physical properties should be confirmed before using.
之江JS-8100典型技术参数/Typical Technical Data
之江JS-8100操作及安全/ Operation and safety
施工现场应具有良好的通风系统。
表面处理：基材表面需干燥、清洁，去除应力、静电、灰尘、油污等。
粘结：将胶体用胶枪挤到已清理干净的表面，使之分布均匀，如果温度较低，固化时间会延长。
施胶后的部件请立即装配在一起，以便胶水达到良好润湿作用，这将有助于粘接效果。
装配好部件如果存放的环境较干燥（相对湿度小于50％），建议增加湿度以合适的固化交联速度。
Operation：
The construction site should have a good ventilation system.
Surface treatment：the surface of the substrate needs to be dry and clean, so as to remove stress, static electricity, dust and oil pollution.
Bonding：The sealant is squeezed onto the cleaned surface by glue gun to make it distribute evenly. If the temperature is low, the curing time will be prolonged.
The components after using sealant should be immediately assembled so that the glue reaches a good wetting effect, which will lead a good bonding.
If the assembly parts are dry (relative humidity is less than 50%), it is recommended to increase the humidity to increase curing speed.
--即开即用，请勿长时间暴露于空气中。
--保持物料先出使用。
--在通风良好的场所使用。
--工作场所请勿进食。
warning：
The product should not expose to the air for a long time.
Keep the material advanced first out.
Processing under good ventilation condition
Do not eat in the workplace.
之江JS-8100颜色及包装/Color and Package
310ML、20L小桶或者200L大桶。
Packing：310ML、5 gallon bucket or 55 gallon bucket.
储存及有效期/Storage& Shelf life
贮存温度：存放于通风良好干燥的地方，保存环境温度30℃。
之江JS-8100保质期：12个月
Recommended storage temperature：Store in a well ventilated and dry place and keep the ambient temperature below 30 ℃.
Shelf life：12 months
危险指示/安全建议/运输规则：
如长期的或重复的接触,要戴防护手套。
远离热源/火花/明火。禁止吸烟。保持容器密闭。使用防爆的电气/通风/照明设备。
按照非危险品运输。
Safety advice：
Wear protective gloves if you need a long or repeated contact.
Keep away from heat. No Smoking. Keep the container closed.
Transport according to non-dangerous goods regulations.
